Apartment Basics Kit: What's Inside & How to Set It Up

By Wyze | Smart Home Security Cameras & Devices | Published: 2026-10-18

Category: How-to Guides

See everything included in the Wyze Apartment Basics Kit and follow a simple, step-by-step setup guide designed for renters who want security without drilling or wiring.

Quick answer

The Wyze Apartment Basics Kit includes a Wyze Battery Video Doorbell and a Wyze Cam Pan v3, both fully battery-powered for easy, no-drill installation. Set up takes under 30 minutes using the Wyze app, and you can move the devices with you when you leave.

What's in the box

The Apartment Basics Kit comes with two core devices: the Wyze Battery Video Doorbell and the Wyze Cam Pan v3. The doorbell gives you a wide head-to-toe view of visitors, smart motion alerts, and long battery life — no hardwiring required. The Wyze Cam Pan v3 adds smooth 360° pan coverage, letting you check on a whole room or area from the app. Both devices are battery-powered, so you don't need to drill holes or run wires, which is ideal for renters who want to avoid permanent changes.

The kit also includes all necessary mounting brackets, screws (optional if you prefer adhesive), and USB cables for charging. There is no hub or base station required — each device connects directly to your Wi-Fi network through the Wyze app.

What you'll need before starting

Before you unbox, make sure you have a smartphone with the Wyze app installed (iOS or Android), a 2.4 GHz Wi-Fi network, and a charged USB power bank or wall adapter for initial device charging. The doorbell and camera ship with partial battery charge, but a full charge before setup prevents interruptions. Also, decide where you want to mount each device — the doorbell works best at about 48 inches from the ground, and the Pan v3 should be placed on a flat surface or shelf for optimal 360° coverage.

Common setup pitfalls to avoid

A frequent mistake is starting setup before the devices are fully charged. The Battery Video Doorbell can take up to 6 hours to charge fully. If you try to pair it while the battery is low, the app may fail to detect it or disconnect during firmware updates. Another common issue is placing the Wyze Cam Pan v3 too close to a wall — it needs at least a few inches of clearance on all sides to rotate freely and achieve full pan and tilt range.

Step-by-step setup guide

Charge both devices fully: Connect the Battery Video Doorbell and Wyze Cam Pan v3 to USB chargers. Wait until the LED indicators show solid green or the app reports 100% charge. This can take 4–6 hours for the doorbell and about 2 hours for the camera. Checkpoint: Don't skip this — low battery is the #1 cause of pairing failures.
Install the Wyze app and create an account: Download the Wyze app from the App Store or Google Play. Open it, tap 'Sign Up,' and follow the prompts to create an account. Make sure your phone is connected to your 2.4 GHz Wi-Fi network. Checkpoint: The app will ask for location and notification permissions — grant them for motion alerts to work.
Add the Wyze Battery Video Doorbell: In the app, tap the '+' icon, select 'Add Device,' then choose 'Battery Video Doorbell.' Follow the in-app instructions to scan the QR code on the device, connect to Wi-Fi, and mount the doorbell using the included adhesive strip or screws. Position it about 48 inches from the ground for the best head-to-toe view. Common mistake: Mounting too high or too low — a head-to-toe view requires the doorbell at chest height.
Add the Wyze Cam Pan v3: Back in the app, tap '+' again, select 'Add Device,' then 'Wyze Cam Pan v3.' Scan the QR code on the camera base. Place the camera on a flat surface or shelf — it does not require wall mounting. The camera will rotate 360° during setup to calibrate its pan range. Checkpoint: Ensure the camera has at least 4 inches of clearance on all sides so it can pan and tilt without obstruction.
Test motion alerts and video feed: Once both devices show as online in the app, walk in front of the doorbell and camera to trigger motion events. Check that you receive a push notification and can view live video. Adjust motion detection zones in the app if you want to reduce false alerts from passing cars or trees. Next step: Customize alert schedules and notification settings so you aren't disturbed during sleep or work hours.

Product facts

Apartment Basics Kit: Perfect for renters, the Apartment Basics Kit gives you easy home security without drilling, wiring, or permanent installation. Both devices are fully battery-powered, making setup simple and landlord-friendly. This means you can install the system in minutes and take everything with you when you move, leaving no holes or damage behind.
Apartment Basics Kit: Wyze Battery Video Doorbell lets you see and talk to visitors with a wide head-to-toe view, smart motion alerts, and long-lasting battery life—no hardwiring required. You get doorbell functionality even in apartments without existing doorbell wiring, and the wide view helps you see packages left at your door.
Apartment Basics Kit: Wyze Cam Pan v3 adds smooth 360° coverage… The pan capability lets you scan an entire room from the app, so one camera can cover more area than a fixed lens model.